Side Mount Printer Shelf – Setup Guide
This guide walks you through installing the Side Mount Printer Shelf onto your ATA Photobooth. Please review all steps before starting. Setup Video Watch the quick setup short below, then follow the written steps. Prefer opening in YouTube? Tap here. What’s Included Side mount printer shelf (pre-assembled) Mounting bracket / arm Mounting hardware (bolts, washers, […]
DNP WCM Plus Setup Guide
DNP WCM Plus Setup Instructions 💡Tip: Keep the guide open while working through the setup to ensure all steps are completed in order.
DNP WCM Plus Module Wireless Printing Format Error
Photos print in the wrong format (stretched / cropped) Quick checklist to correct 2×6 or 4×6 print formatting from the WCM server and your booth software. Step-by-Step Resolution http://192.168.4.1 Copy WCM Server ☑ 2×6 (desired) 4×6 6×8 Tip: You can save more than one printing size Expected result: 2×6 photo strips render without stretching or partial […]
Roamer Stand Assembly Guide
Ring Roamer Stand Assembly Guide | ATA Photobooths Follow this step-by-step visual and written guide to assemble your Ring Roamer Stand. This newly designed modular system is built for quick setup and stability. Parts Checklist (2) Self-leveling cross plates (base) (1) Lower column (with bottom thread) (1) Upper column (with tiltable bracket) (1) Ring Roamer […]
Printio Quick Setup Guide
How to Set Up Your Printio Module to Work with Your iPad
Watch the Video Tutorial What’s Included in the Printio Module Kit What You’ll Need Step-by-Step Setup Guide Step 1: Connect the LAN Cable Step 2: Set Up the USB Hub Step 3: Power the Printio Module Step 4: Connect the Printer Configuring Your iPad Testing the Connection Printing Photos Troubleshooting If you experience issues: Please […]
How to Fix common issues on Printio
Step-by-Step Instructions Step 1: Confirm “Ethernet” appears on the iPad If missing: Unplug the USB cable from the head unit and plug it back in firmly. Recheck on the iPad. Step 2: If Ethernet shows but printer or printio.local won’t load Your IP looks fine, but you can’t see the printer or open http://printio.local. Unplug USB-C power, wait 15–20 seconds, then plug […]
Switch Helio Sport/E1000 Faceplate to Landscape Mode
Module Connection Guide Step-by-Step Instructions Notes:
Ring Roamer Setup Guide
Install your iPad into your Sapphire Ring Roamer Step-by-Step Instructions Step 1: Clean the iPad Screen Step 5: Reattach the back cover Step 2: Orient the iPad correctly Step 6: Calibrate the touchscreen (if necessary) Step 3: Install the iPad Step 7: Test the touchscreen Step 4: Prepare the back cover How to Assemble Ring […]
How to install iPad into E1000
How to Insert Your iPad into the E1000 Photo Booth Step-by-Step Instructions Step 1: Loosen the Center Screw Step 8: Align the iPad Step 2: Remove the Back Plate Step 9: Reattach the Bracket Step 3: Loosen the Wing Nuts Step 10: Secure the Wing Nuts Step 4: Remove the Bracket Step 11: Close the […]
