How to Set Up Your Printio Module to Work with Your iPad

Watch the Video Tutorial

What’s Included in the Printio Module Kit

• USB to LAN Adapter
• LAN Cable
• Power Connection Cable

What You’ll Need

• An iPad (ensure you have the correct cable: USB-C or Lightning).
• A USB hub compatible with your iPad.

Step-by-Step Setup Guide

Step 1: Connect the LAN Cable

1. Plug one end of the LAN cable into the USB to LAN Adapter.
2. Connect the other end of the LAN cable to the LAN port on the Printio Module.

Step 2: Set Up the USB Hub

1. Attach your USB hub to the iPad using the appropriate cable (USB-C or Lightning).
2. Plug the USB to LAN Adapter into the USB hub.

Step 3: Power the Printio Module

1. Connect the power cable to the Printio Module.
2. Plug the other end of the power cable into a power outlet or power strip.

Step 4: Connect the Printer

1. Use the printer’s USB cable.
2. Plug the USB-A end of the printer cable into an available port on the Printio Module.

Configuring Your iPad

1. Open Settings on your iPad.
2. Verify the Ethernet connection under network settings.
3. Switch to Manual IP Configuration:
   • Enter the IP address and Subnet Mask provided in the manual.
   • Save the settings.

Testing the Connection

1. Open a browser on your iPad and go to printio.local.
2. Confirm the printer is recognized and correctly configured.
3. Perform a test print to verify functionality.

Printing Photos

1. Open the photo you want to print from your gallery.
2. Tap the Share button and select Print.
3. Choose your printer and select the desired size (e.g., 4×6 or 2×6 strips).
4. Tap Print to start printing.

Troubleshooting

If you experience issues:

• Check all connections are secure.
• Confirm the iPad is recognizing the Ethernet connection.
• Ensure the printer driver is correctly configured.