How to switch the camera bracket to Portrait (Lumia, Marquee and Eco)

Step 1: Remove the Wing Nuts

Locate the two wing nuts on each side of the bracket. It doesn’t matter which one you remove first.

Use your hands to unscrew and remove both wing nuts.

Step 2: Remove the Bracket

Once the wing nuts are removed, lift the bracket off carefully.

Step 3: Flip the Bracket

Rotate the bracket to switch its orientation for portrait mode.

Step 4: Reattach the Wing Nuts

Place the bracket back into position and begin screwing in the wing nuts.

Start with the bottom wing nut first to hold the bracket in place, then secure the top one.

Step 5: Attach the Camera

Grab your camera and align it with the bracket.

Make sure the screw for the camera is positioned correctly.

Step 6: Secure the Camera

Insert the screw into the back of the camera and tighten it to hold the camera securely in place.

Step 7: You’re Ready to Take Photos

Your camera is now set up in portrait mode and ready to use.

If you ever want to switch back to landscape mode, simply reverse these steps.