Ring Roamer V2 Operations Manual

Installation of iPad

NOTE: Make sure you do not rotate the LED lights. They are aligned for countdown effect from the bottom
of the unit up the sides.

• STEP 1. Lay Ring Roamer on a flat surface with something to protect the front from being scratched – soft cloth is fine – but sturdy location
• STEP 2. Remove 8 screws on the back of the roamer unit with a Phillips head screwdriver.
• STEP 3. Place iPad 10.5 Pro into the slots. It’s a tight fit to hold in place. Make sure the top of the iPad is at top of Ring Roamer (Trigger is top)
• STEP 4. Insert iPad power cable into bottom of iPad. The cables will be in between the iPad and back of unit. Don’t let them overlap the foam pieces that hold iPad into place. Remember to align roamer hole to have access to iPad power button.
• Done.

ROAMER Custom LED Lighting Programming

Note: 12 V Power Supply is MAX – Anything over 12V can overload
Roamer and cause permanent damage

• The Ring Roamer has a built in customized light show designed for you to use at events.
• Roamer Mode – Full rotating Color LEDS
• Photo Mode – A 3 Second Chase of white lights to go to full white when taking a photo
• Enter Data Mode – This will put the roamer into enter data mode (light blue for data entry)
• Blackout Mode – Turn LEDS off to save battery
• Program Mode – Allows for the setting of the brightness of the color LED’s, The White LED’s and to choose your
• Enter Data Moe Color

To Get Started

• Taking A Photo – – – – – – – – – – – – – – – – – – – –
• STEP 1 Plug battery of power supply into DC power outlet in the back of the roamer. Make sure battery is on.
• STEP 2 Hit trigger button 3 times and the Rainbow LED’s will be active. This puts the Ring Roamer into ROAMER MODE
• STEP 3 Hit trigger button one time and this will put the Ring Roamer into the white LED countdown PHOTO MODE. The lights will stay white taking photo
• STEP 4 Hit trigger button one more time to send the Ring Roamer into ENTER DATA MODE
• STEP 5 Hit trigger button one time and this will put the Ring Roamer back into ROAMER MODE
• Programming Mode – – – – – – – – – – – – – – – – – – –
• STEP 1 From Startup Press and hold trigger button for 4 seconds. This sends the Roamer into STANDBY MODE. You can use this mode to turn lights off when you are not attempting to Roam at the event.
• STEP 2 While in STANBY mode, you can press and hold button for 4 seconds. This sends the Roamer into PROGRAMMING MODE. You can use this mode to adjust the intensity (brightness) of the LED lights.
• STEP 3 There are THREE sections in the PROGRAMMING MODE. The first section is the intensity of the ROAMING MODE. While in this section, you can choose the intensity of the Rainbow chase.
• STEP 4 Once you select the intensity, Double click the trigger button and it will save the setting.
• STEP 5 The next Segment is the white light intensity. Single press trigger button to choose intensity level. Double Click button to save.
• STEP 6 The next Segment allows you to choose the color of the guest enter data mode. Single click button through the colors. Once you select the color you would like to use, double click to save. You will see the Ring Light Chase through the colors and the go dark. This means programming is complete.
• STEP 7 Click trigger button 3 times and you are ready to roam!

Download the PDF version

• Ring-Roamer-Operations Manual